We often persist with the theory “Quality To start with, Prestige Supreme”. We are fully committed to delivering our clientele with competitively priced good quality items, prompt delivery and experienced support for Leading Manufacturer for Petrochemical Products Cement Fluid Loss Additives, We welcome new and outdated consumers from all walks of existence to speak to us for long run enterprise relationships and acquiring mutual success!
We often persist with the theory “Quality To start with, Prestige Supreme”. We are fully committed to delivering our clientele with competitively priced good quality items, prompt delivery and experienced support for Cement Fluid Loss Additives, Fluid Loss Additives, Petrochemical Products Cement Fluid Loss Additives, We solution have passed through the national skilled certification and been well received in our key industry. Our specialist engineering team will often be ready to serve you for consultation and feedback. We’ve been able to also give you with no cost samples to meet your needs. Best efforts will likely be produced to supply you the very best service and solutions. For anyone who is considering our business and solutions, please speak to us by sending us emails or get in touch with us right away. As a way to know our products and solutions and enterprise. lot more, you’ll be able to come to our factory to find out it. We’ll constantly welcome guests from around the globe to our firm. o build enterprise. elations with us. You should actually feel absolutely free to make contact with us for small business and we believe we’ll share the top trading practical experience with all our merchants.
Medium-low temperature fluid loss agent XBA-203S
Introduction
XBA-203S is a compound power fluid loss agent.
XBA-203S’ applicable temperature is 0~90℃(BHCT).
XBA-203S is not retarded and benefited to cement strength development.
XBA-203S isn’t resistant to salt, not suitable for brine system.
XBA-203S has a certain effect in viscosity and some dispersant may be added in cement slurry.
XBA-203S only can be used through dry mixing.
Basic performance
Product |
Appearance |
Dosage |
|
Freshwater system |
Brine system |
||
XBA-203S |
Gray powder |
0.8~2.0% |
Inapplicable |
Slurry performance
Item |
Experimental condition |
Technical indicator |
|
Fluid loss, mL |
80℃,6.9MPa |
≤50 |
|
Others |
Initial consistency, Bc |
80℃,46.5MPa,45min |
≤30 |
40-100Bc thickening transition time, min |
≤40 |
||
Thickening time, min |
≥70 |
||
Free fluid, % |
80℃,0.1MPa |
≤1.4 |
|
24h compressive strength, MPa |
102℃,20.7MPa |
≥14 |
|
Slurry composition |
API class G(HSR) 800g , fresh water , XBA-202S 12g(1.5%), XBA-101L 8g(1.0%), defoamer 1.2g(0.15%).Slurry density: 1.90±0.02g/cm3(adjusted by adding fresh water). |
Packaging and Storage
Packaging: XBA-203S is packed with 25kg bag, or according to user requirements.
Storage: The packed products should be saved in a dry and ventilated place, avoid rain, moisture, exposure and heat.