Automated Dual-cell HTHP Consistometer
Model: TG-8040D
TG-8040D Dual-cell HTHP consistometer is specially designed to measure the thickening time of oil well cements under simulated down-hole pressures and temperatures. The Model TG-8040D offers a computerized Data Acquisition and Control system, automatic temperature and pressure control, and a variable speed motor all standard in one easy-to-use unit. And the TG-8040D can be used to prepare slurries for the measurement of free water content, viscosity, fluid loss, and rheological and various other properties. A chart recorder for programming temperature control and display of current test results in real time.
The Model TG-8040D can simultaneously perform two independent cement thickening behavior tests under a variety of downhole well conditions, used in laboratories involved with oil well cement research programs, research and testing of cement additives, cement manufacturers’ quality assurance programs, and the research and field labs of well servicing companies.
Features
●Two Independently Operated Test Cells
●Automatic temperature and pressure control, variable speed motor (0 – 150 RPM) powered by a magnetic drive
●Computerized Data Acquisition and Control system, provides detailed test data in convenient formats, and can control multiple units from one computer via WIFI or transfer wire
●Safety Features- adjustable temperature, pressure, and consistency alarms
●Colorful LED Charter recorder
●In compliance with API Specification 10
●An internal-cooling coil inside the oil reservoir for quick cooling of hot oil
●External Chiller Connections optional
●Indicators for test time, consistency, pressure and temperature are readily visible
●Variable speed motor control and digital display of motor speed (optional)
Main technical parameters:
| Max input power | 10KW | Rotational Speed | 150+/-15 rpm |
| Maximum Temperature | 600 °F (315°C) | Input Voltage | 220 V, 50 Hz |
| Maximum Pressure | 40,000PSI (275MPa) | Heater Power | 8 KW |
| Thickening time range | 0-100Bc | Size | 1220x890x1740mm |
| Data Acquisition System | TG-5270 | Weight | 980kg |
Assorted requirement:
Cooling water: 0.2 – 0.6 MPa (30-85psi)
Compressed air: 0.5-0.8 MPa (0～120psi)
Operation temperature: 4-50℃
Environment humidity: 0-95% non-condensing.
Main parts and description thereof
| Main parts |
Brand |
Main parts |
Brand |
| Booster pump (compression ratio: 555:1) |
USA |
Temperature & pressure programming controller |
UK |
| High-pressure Valve |
USA |
Timer |
Japan |
| Chart recorder or 10.5-inch color touch screen |
Japan/Taiwan |
Low-pressure connectors |
Taiwan |
| Pressure sensor |
Italy |
Air-driven connectors |
Taiwan |
| Switch |
Taiwan |
Magnetic drive device |
USA/UK |
TG-5270 data acquisition system includes:
a. Computer display
b. Processing software (life-long free upgrade)
c. Input/output cables
d. Data storage and print
Signals from sensors of pressure, temperature and consistency can by acquired through the TG-5270 data acquisition system and then sent to be processed after arithmetic processing, realizing displays of values of time, consistency, pressure and temperature. Curves can be displayed and data can be stored. RS-232 interface is communicated with PC. Alarming for pressure, temperature and consistency is provided.
Operating voltage: AC230V ±10% (20Wconsumption), 50/60HZ
Processible signal: 4-20m A or 0-5V (0-6mV weak signal at the input end)
Operating temperature: -70 – 140F°
Data transmission mode: RS-232
Max transmission distance: 100M (reliable transmission)
Transmission digit rate: 1200bit
Acquisition accuracy: <±0.5% (under good condition of liner of sensor)
Thermocouple type:J