High temperature fluid loss agent XBA-203L
Introduction
XBA-203L is a high temperature fluid loss agent.
XBA-203L’s applicable temperature is 60~150℃(BHCT).
XBA-203L is resistant to salt and applicable to saturated brine.
XBA-203L has a retarding effect and is suitable for high temperature and deep well cementing.
XBA-203L slurry system is stable and has good compatibility.
XBA-203L is liquid and only can be used through wet mixing.
XBA-203L’s dosage need to be adjusted according to temperature, salinity and cementing requirements.
Basic performance
Product |
Appearance |
Dosage(BWOC) |
|
Freshwater system |
Brine system |
||
XBA-203L |
colorless or light yellow liquid |
3~6% |
4~8% |
Slurry performance
Item |
Experimental condition |
Technical indicator |
|
Fluid loss, mL |
Freshwater system |
120℃,6.9MPa |
≤50 |
Brine system |
≤150 |
||
Others |
Initial consistency, Bc |
120℃, 73.9MPa,61min |
≤30 |
40-100Bc thickening transition time, min |
≤40 |
||
Thickening time, min |
≥120 |
||
Free fluid, % |
80℃,0.1MPa |
≤1.4 |
|
24h compressive strength, MPa |
144℃,20.7MPa |
≥14 |
|
Slurry composition |
Fresh water system:API class G(HSR) 600g , silica flour 210g(140-200 mesh, 35%), fresh water, XBA-201L 30g(5%), XBA-105L 6g(1%), defoamer 1.2g(0.2%). Slurry density: 1.90±0.02g/cm3(adjusted by adding fresh water). Brine system:API class G(HSR) 600g, silica flour 210g(140-200 mesh, 35%), 18% brine , XBA-203L 36g(6%), XBA-105L 6 g(1%), defoamer 1.2g(0.2%). Slurry density: 1.90±0.02g/cm3(adjusted by adding 36% brine). |
Packaging and Storage
Packaging: XBA-203L is packed with 25kg barrel, or according to user requirements.
Storage: The packed products should be saved in a cool and ventilated place, avoid exposure and heat.