Cement Permeability Tester/
Introduction/
The Model 3020 Cement Permeability Tester is used to test the relative permeability of a set cement sample. The Model 3020 Permeameter is designed using strict adherence to current API / ISO standards specified in API Spec 10B-2 Appendix G and ISO 10426-2. The Model 3020 consists of a stainless steel pressure vessel, which houses a standard 1-inch diameter cement core sample. A simply designed rubber holder squeezes the sample by tightening the plug down into the pressure vessel. Flow is thereby isolated into the sample without any leakage. Gasses & fluids are passed through the core sample at variable pressures using a highly reliable pressure regulator and accumulator. Pressure and flow rates of the fluid are easily measured and recorded using a pressure gauge and flow-meter, mounted in an easy to view position. Simple operation, top quality parts, and durable construction allow long term and low cost laboratory use.
Specifications/
Gas Supply Maximum 500psi (2448 kPa) /
Dimensions 17 x 12 x 14 in (43 x 29 x 35 cm)
American original TESCOM gas pressure regulating valve, ensuring the accurate adjustment of permeability test’s required gas pressure./ TESCOM
Unique design sample holder, ensuring the accuracy and precision of the test.
Use instantaneous, accumulative measure method to measure the gas permeability of the sample/
Use visual display float type gas flowmeter, visual display the dynamic instantaneous flow of gas.
Use Swagelok Valve
Features/
l Simple installation and operation.
l Easy to use pressure controller and flow meter ensure highly accurate, highly precise relative permeability measurement.
l Safe to operate utilizing high-strength, stainless steel sample container.