Mobile Laboratories, with instruments for testing oilwell cement and drilling fluid, to oil fields. Mobile labe can be designed to suit for oil field environment and moved to any oild field or bench at sea. The structure of the lab can resist very aggressive environment and climate. Whatever in hot desert or on the north sea with cold wind, the lab can work in good situation.
The boundary dimension of the lab is the same as standard container, and also can be designed into the specific and needed. The cementing lab must be checked for weld, especially for lifting hook and cut-through weld. The lab can do load tests heavier 1.5 times than itself, and it is totally different with camping house.
Main technical parameters and configuration
Specification | 20 feet | 40 feet |
Boundary size | 6058*2438*2591 | 12192*2438*2591 |
Lab weight | 9000kg | 14000kg |
Power | 30kw | 30kw |
Output power source | AC380V/50Hz | |
Voltage | AC220V/50Hz | |
Gas source pressure | 0-0.8MPa | |
Water source pressure | 0.2-0.6MPa【20-80psi】 | |
Equipments contained | Pressurized curing chamber, Pressurized consistometer, Atmospheric consistometer, Fluid loss cell, Constant speed mixer, Atmospheric curing box, Six-speed rotation viscometer, Compression tester, Air condition, Computer, Nitrogen cylinder, Sink, Air compressor, Workbench, Wall cupboard, Emergency light, Smoke alarm, Dry power extinguisher, Voltage-stabilized source | |
Living room | Air condition, Single-bed, Office-table, Book-self, Wardrobe, Escape door | |
Main body structure | Used box iron, angle iron, rectangular steel tube and steel plate in compliance with national standard |